Driveway & Walkway Edmonton

Interlock pavers are widely considered the best option for Edmonton driveways because individual pavers flex with freeze-thaw movement instead of cracking. Stamped concrete offers a more affordable alternative with many design options. Asphalt is cost-effective and handles Edmonton winters well with proper maintenance. Natural stone provides a premium look but comes at a higher price point.

Asphalt driveways typically cost $8 to $15 per square foot. Stamped concrete runs $12 to $22 per square foot. Interlock pavers range from $18 to $35 per square foot. Natural stone is $25 to $50 per square foot. For a standard two-car driveway (400 to 600 square feet), total project costs range from $4,000 for basic asphalt to $25,000 or more for premium pavers.

Yes. We install hydronic (hot water) and electric radiant heating systems beneath driveways and walkways. Heated driveways melt snow and ice automatically, eliminating the need for shoveling and salt application. They are installed during new construction or major renovation. Operating costs depend on the system type and Edmonton's energy rates, but many homeowners find the convenience well worth it.

Paver driveways need periodic joint sand replenishment (every 2 to 3 years), occasional sealing to protect against stains and UV, and prompt replacement of any shifted or damaged pavers. Avoid using metal-edged shovels or snowblowers set too low in winter. We offer maintenance packages that keep your paver driveway looking new year after year.

Base preparation is the single most important factor in driveway longevity in Edmonton. Our heavy clay soils and extreme freeze-thaw cycles demand a properly excavated and compacted base of crushed gravel (typically 8 to 12 inches deep) to prevent heaving, settling, and cracking. Cutting corners on the base leads to premature failure regardless of the surface material.

A standard residential driveway project takes 3 to 7 days depending on material and complexity. Walkway projects are typically 1 to 3 days. This includes excavation, base preparation, installation, and finishing. Concrete projects require additional curing time (typically 3 to 7 days) before vehicle traffic. We provide a detailed timeline during the quoting process.